Contents x
    Release Notes
    • 23 Apr 2024
    • 31 Minutes to read
    • Contributors
    • Print
    • Dark
      Light
    Contents

    Release Notes

    • Updated on 23 Apr 2024
    • 31 Minutes to read
    • Contributors
    • Print
    • Dark
      Light
    Article Summary

    Release 23 Apr 24

    Version 2.1.202404231

    TypeDescription
    NewImproved error handling for data sources: Asset errors are shown per column and row directly in the data source preview now.
    This improves the general workflow of configuring data sources and reduces generic errors like Cannot read 'Bool' value in data source or similar.

    Release 16 Apr 24

    Version 2.1.202404163

    TypeDescription
    New"Signals & Slots" list in design editor also shows control properties which use Hive rules and is now called "Connections".
    This also includes:
    • Easier spotting and navigation to erroneous Hive rules in control properties
    • Improved visualization of the active filter in list
    NewPreviously selected control is automatically re-selected when entering the design editor
    NewLarge Hive editor is automatically opened when enabling Hive for a control property
    NewHive can now also be enabled for the Font property
    Fix"Ooops error" when hovering with the mouse over CSS classes in the custom CSS editor
    FixRe-added code completion for built in CSS classes of controls which were erroneously removed with introduction of Monaco editor
    FixRemoved incorrectly shown scrollbars in design editor when selecting a control which caused unpleasant & irritating layout shifts
    FixSometimes enabling Hive for a control property required 2 clicks

    Release 09 Apr 24

    Version 2.1.202404091

    TypeDescription
    NewIntroduce Custom code as successor of CustomJS

    Release 02 Apr 24

    Version 2.1.202404021

    TypeDescription
    NewButton property "Hyperlink target" which allows more fine grained control over where the link should open (in new tab, same tab, parent frame, ...)
    NewImproved cfgr draft preview (configurations will be persisted, edit/copy urls are now supported, ...)

    Release 20 Mar 24

    Version 2.1.202403201

    TypeDescription
    FixPinterest share button didn't work in some occasions
    FixInconsistent behavior in the code editor when using save hotkeys

    Release 18 Mar 24

    Version 2.1.202403183

    TypeDescription
    NewNew code editor inside the configurator editor. Based on the so-called "Monaco editor" which is also used by VS Code.
    NewButton in table components to conveniently create a table selection component
    Change3d viewer control in design editor automatically reloads when asset bundle assignments of configurator are changed to always show the latest model
    FixImproved behavior for Ctrl+z in code editor. No more unexpected occurrence of code from other components etc.
    FixDesign editor was sometimes broken after changing asset assignments of configurator

    Release 14 Mar 24

    Version 2.1.202403141

    TypeDescription
    Fix"Oops error" after reconnecting a timed out session in configurator
    FixAutomatic activation of 3d viewer inspector in configurator preview when not possible due to usage of viewer production build

    Release 13 Mar 24

    Version 2.1.202403131

    TypeDescription
    NewAdd option to disable autofocusing camera when switching models in viewer control
    NewFresh look for configurator preview header with new options
    • Use local custom TS/JS
    • Show SigSlo logs in the browser console
    ChangeWhen the Babylon inspector is shown in the configurator preview using the button in the preview header, it will be automatically re-shown after page refresh
    ChangeNew browser tab titles, so that different ares like editor, assets, configurator preview etc. are easier to distinguish when developing a configurator with multiple tabs open
    FixConfigurator preview watch results have not been updated anymore after session reconnect

    Release 04 Mar 24

    Version 2.1.202403041

    TypeDescription
    NewAsset Manager: UI displays asset errors and warnings to inform about problems in asset bundles
    NewAsset Manager: Now supports additional material types (like "StandardMaterial") for 3D model uploads
    ChangeRedirect to home page instead of dashboard after login and other situations
    ChangeAn asset bundle with errors can no longer be published

    Release 22 Feb 24

    Version 2.1.202402221

    TypeDescription
    NewA new Text.encodeJson() function escapes reserved characters in a JSON text
    NewThe Number.toText() function now accepts an optional Locale parameter to format a number according to that region (e.g. Locale.de, Locale.fr etc.)

    Release 20 Feb 24

    Version 2.1.202402201

    TypeDescription
    NewModernized the whitelisted domain settings on the embedding page
    ChangeTo make configurator draft previews behave more like published configurators, only updates of actively used components will now be sent (you can still use watches in the debug panel to access any component)

    Release 13 Feb 24

    Version 2.1.202402131

    TypeDescription
    FixBroken "forget password" feature

    Release 12 Feb 24

    Version 2.1.202402121

    TypeDescription
    NewShow origin of 3d model in babylon asset preview
    NewSelect nodes in babylon asset via picking mesh in preview

    Release 08 Feb 24

    Version 2.1.202402082

    TypeDescription
    NewOptional chaining operator (?.) in Hive to only access properties / call functions when the current expression is not empty
    NewYou can now create empty lists ( []) in Hive. The type of the list will be inferred automatically.
    NewHive variables are now fully supported in table component queries.

    Release 02 Feb 24

    Version 2.1.202402021

    TypeDescription
    NewMake viewer control loading mask texts adjustable
    FixViewer control loading mask gets hidden immediately when starting AR journey

    Release 01 Feb 24

    Version 2.1.202402011

    TypeDescription
    NewNew proprties gap & padding for container controls (panel, layer & wizard page). padding is also available for dataviews.
    Those new properties behave exactly the same as their CSS counterparts gap & padding.
    NewChange assigned material of any mesh in the babylon asset
    NewBatch saving node changes (tags and material) in babylon asset

    Release 24 Jan 24

    Version 2.1.202401241

    TypeDescription
    NewWelcome page
    NewAdvanced configurator templates with asset support
    NewAsset tree view: Multi-select with Ctrl or Shift and bulk edit them

    Release 9 Jan 24

    Version 2.1.202401091

    TypeDescription
    NewSelf service account creation
    NewRevamped invitation system
    NewAuto save changes in design editor when page is left to go to configurator preview (or somewhere else)
    NewPrevent closing of page when there are unsaved changes in design editor
    FixPrevent changes in custom CSS to overwrite CSS variables which have been set by the UpdateCssVariables slot

    Release 21 Dec 23

    Version 2.1.202312211

    TypeDescription
    NewAdd UI for configuring textures inside material asset basic editor

    Release 12 Dec 23

    Version 2.1.202312121

    TypeDescription
    NewYou can now use variables in Hive!

    Release 21 Nov 23

    Version 2.1.202311211

    TypeDescription
    NewPreserve file names when downloading assets
    NewAdd additional shopify parameters (Weight, WeightUnit & CategoryId)
    FixChanges in the asset draft are now always correctly applied to the cfgr draft
    FixFix problems with the viewer-only configurator creation

    Release 08 Nov 23

    Version 2.1.202311081

    TypeDescription
    FixIntroduce a Url property for GraphicComponent that is correctly updated e.g. when a configuration is copied.
    The GetUrl() function does not always update correctly and will be deprecated in a future release.

    Release 07 Nov 23

    Version 2.1.202311071

    TypeDescription
    NewManagers & admins can now manage company settings & api tokens
    RemoveIntegration system (FTP, REST, Website, Magento)
    RemoveMagento 2 shop

    Release 06 Nov 23

    Version 2.1.202311061

    TypeDescription
    NewYou can now sort the records returned by a data source query and/or limit how many records can be returned

    Release 31 Oct 23

    Version 2.1.202310311

    TypeDescription
    NewLive-preview of 3d materials within the asset material editor
    NewContent of data sources can now be previewed directly in the asset editor
    ChangeImproved import of data sources based on excel files:
    • General improvement how column types are detected
    • Default values can be changed when "Auto config detection" is enabled
    • Default values are now considered when auto detecting the type of a column

    Release 24 Oct 23

    Version 2.1.202310241

    TypeDescription
    ChangeColor properties of material assets:
    • Text input is now a hex color code
    • More sophisticated color picker
    • Correctly apply colors in the 3d model (automatic color space conversion)

    Release 19 Oct 23

    Version 2.1.202310194

    TypeDescription
    ChangeVarious Babylon.js inspector adjustments:
    • added button to start inspector from debug panel
    • inspector renders outside configurator to keep configurator layout untouched
    • various fixes due to reworked integration in 3d viewer

    Release 17 Oct 23

    Version 2.1.202310171

    TypeDescription
    NewData source queries now support the not and - (negation) operator as well as all number functions (toText, round, floor, ceiling, truncate, atLeast, atMost)

    Release 16 Oct 23

    Version 2.1.202310161

    TypeDescription
    NewImprove user experience for material asset expert editor

    Release 11 Oct 23

    Version 2.1.202310111

    TypeDescription
    NewYou can now target an existing configurator when copying a configurator to another company (a draft will be created)
    NewA configurator draft will display a lock icon when another user is currently editing it.

    Release 4 Oct 23

    Version 2.1.202310042

    TypeDescription
    NewCopy configurators and asset bundles across companies

    Release 4 Oct 23

    Version 2.1.202310041

    TypeDescription
    NewCustom layout property for dataviews which allows the user to further customize the appearance of dataview entries using a HTML templating language
    NewHive in controls enabled for Entries & Value property of dataviews & comboboxes
    NewNew parameter for viewer AR slot which allow customization of environment and loading screen logo
    FixLoading screen of the babylon asset preview sometime got stuck
    FixWrong assignment of texture image assets in babylon asset preview

    Release 17 Aug 23

    Version 2.1.202308171

    TypeDescription
    NewCollapsible sidebar in dashboard
    NewAllow deletion of configurator even if there are finished or shared configurations
    NewNew "sanitize value" checkbox in editor for certain control properties when "Hive in controls" is enabled for them (e.g. label.Value, panel.HeaderText, ...) which allows disabling of User input sanitization when needed
    ChangeImprovements for Hive in controls:
    • Better initial rule when enabling Hive support for Visible property
    • When creating a control via drag & drop of a component, Hive in controls is used instead of SigSlo where possible
    FixIssues when continuing editing in a timed out session.
    E.g. new Hive rule is now correctly applied without having to reload the page or switching the selected component etc.
    FixZooming model in 3d viewer with mouse wheel does not scroll parent containers (like parent page) anymore

    Release 1 Aug 23

    Version 2.1.202308011

    TypeDescription
    New⭐ Hive in controls. You can now write Hive logic in control properties.
    FixThe error indicator for TableComponents now correctly resets when an error in the query is fixed

    Release 15 Jun 23

    Version 2.1.202306151

    TypeDescription
    NewData source queries now allow columns to be modified and new ones to be created
    ChangeYou may now use more operators, functions and if/then/else expressions in query filters

    Release 13 Jun 23

    Version 2.1.202306131

    TypeDescription
    NewNew Shopify shop
    NewProvide cache for data sources to speed up queries
    ChangeRename DIY to FLEX shop
    ChangeMinor fixes (trim whitespace during login, reorder shops types, ...)

    Release 01 Jun 23

    Version 2.1.202306011

    TypeDescription
    NewIntroduce 3D/AR viewer configurator

    Release 24 May 23

    Version 2.1.202305241

    TypeDescription
    NewShow / hide nodes in babylon asset preview
    FixLayering order (z-index) of modal dialogs and load masks

    Release 10 May 23

    Version 2.1.202305102

    TypeDescription
    NewCustom date range picker for configurator metrics on dashboard
    NewIntegrate documentation as dockable side panel (Doc360 Knowledge Base Widget)

    Release 08 May 23

    Version 2.1.202305081

    TypeDescription
    Fix"Oops error" when passing invalid tag manager values to 3d viewer control. This fix requires an update from viewer v9.0.0 to v9.0.1 which is performed automatically by the system.

    Release 03 May 23

    Version 2.1.202305031

    TypeDescription
    NewMaterial parameters in viewer controls Set parameter values slot

    Release 28 Apr 23

    Version 2.1.202304281

    TypeDescription
    NewStart AR slot in viewer control

    Release 27 Apr 23

    Version 2.1.202304271

    TypeDescription
    NewIntersect function for (record component) tables
    ChangeUpdate of all mail texts + links

    Release 20 Apr 23

    Version 2.1.202304201

    TypeDescription
    FixAdded support for viewer version 8 in viewer control
    RemoveRemove Google Analytics from cfgr page

    Release 17 Apr 23

    Version 2.1.202304171

    TypeDescription
    NewCreate empty PbrMaterial assets
    NewUpload JSON files to create PbrMaterial assets

    Release 13 Apr 23

    Version 2.1.202304131

    TypeDescription
    NewAPI which allows the 3d viewer control to be used with custom JS
    New__root__ nodes are now automatically renamed when converting a GLB to a babylon asset to prevent name clashes in the 3d viewer
    NewAutomatically remove unused "default material" from __root__ node when converting GLB to a babylon asset to prevent bootstrap errors in viewer control
    FixBug when importing 3d assets with long material names which prevented creation of some material assets

    Release 04 Apr 23

    Version 2.1.202304041

    TypeDescription
    New⭐ New UI for dashboard and its related pages
    NewUsers with an existing account can be added to the company without invite mail

    Release 30 Mar 23

    Version 2.1.202303301

    TypeDescription
    New⭐ Viewer 3d control
    ChangeEvery company now has asset support
    ChangeReduce workflow schedule interval to 1h

    Release 20 Mar 23

    Version 2.1.202303202

    TypeDescription
    NewSupport creation of 3D assets from GLB files

    Version 2.1.202303201

    TypeDescription
    NewHTTP requests for workflows.

    Release 15 Mar 23

    Version 2.1.202303151

    TypeDescription
    NewMaterial names are now automatically corrected when a Babylon asset is uploaded.

    Release 08 Mar 23

    Version 2.1.202303081

    TypeDescription
    NewThe new text asset can store large textual content that can be used in the configurator editor (unlike a file asset's content).

    Release 06 Mar 23

    Version 2.1.202303061

    TypeDescription
    New3D Preview for babylon assets introduced

    Release 27 Feb 23

    Version 2.1.202302271

    TypeDescription
    NewTag editor for babylon assets introduced
    FixTable components are now always updated correctly when adding or removing columns from their data source

    See new section in Babylon and PBR material assets page and tag manager page in viewer docs for more details on what you can do with them.

    Release 01 Feb 23

    Version 2.1.202302011

    TypeDescription
    NewWorkflows introduced

    Release 05 Dec 22

    Version 2.0.202212051

    TypeDescription
    NewNew Shopware 6 type
    ChangeNew default JSON structure for DIY shop

    Release 10 Oct 22

    Version 2.0.202210101

    TypeDescription
    NewSupport the creation of data source assets based on Excel file assets. Updates on file assets will be propagated to all linked data sources.

    Release 29 Sep 22

    Version 2.0.202209291

    TypeDescription
    NewImprove performance of TableComponent queries.
    Long-running operations, like loading data from a DataSource, are now scheduled more intelligently to reduce waiting times in configurators.

    Release 27 Sep 22

    Version 2.0.202209271

    TypeDescription
    New⭐ Support for Babylon & PbrMaterial assets
    See How to create and use babylon & material assets for more details!
    New⭐ Asset upload dialog provides options to change the suggested name & choose different target folders per asset

    Related releases:

    Release 11 Aug 22

    Version 2.0.202208111

    TypeDescription
    NewSimplify reading & writing of components in CustomJS (custom-js-utils v6 or higher)

    Release 9 Aug 22

    Version 2.0.202208091

    Improvements for navigation & searchability of controls in design editor:

    TypeDescription
    NewSearch field above controls tree
    NewQuick launcher (Ctrl+K) also shows controls when inside design editor
    NewOption in quick launcher to only show components or controls in search result
    FixRe-select control in tree after renaming it even when control is inside inactive wizard page etc.

    Minor fix in dashboard:

    TypeDescription
    FixEnd of day for configuration metrics is now 23:59:59 instead of 23:59:00

    Release 19 Jul 22

    Version 2.0.202207191

    TypeDescription
    NewExcel support for data sources

    Release 7 Jul 22

    Version 2.0.202207071

    TypeDescription
    NewSetEntries slot of dataviews & comboboxes now also support CSS colors like hex codes (e.g. #009a92) or RGB values (e.g. rgb(0, 154, 299)) in addition to Hive images.
    I.e. stuff like "#009a92".ToColor().ToImage() should not be needed anymore in this area and color values from CSV asset data sources can now be used as well.

    Release 6 Jul 22

    Version 2.0.202207062

    Sneak peek = Semi transparent background in editors when pressing Shift+Enter

    TypeDescription
    NewCtrl+S in code editors (hive rule, control properties, CSS editor etc.) saves the current changes and does not show the browsers "Save as" dialog anymore
    ChangeShift+Enter in CSS & control property editor of design component immediately saves changes
    FixSneak peek in design and graphic component shows design resp. graphic instead of global editor background
    FixSneak peek sometimes got stuck

    Release 6 Jul 22

    Version 2.0.202207061

    TypeDescription
    FixBrowser back & forth navigation in asset editor was sometimes not working anymore

    Release 30 Jun 22

    Version 2.0.202206301

    This release contains small tweaks and usability improvements for Assets (preview feature).

    TypeDescription
    NewThe Size of File Assets and DataSources is now displayed in the Asset Editor (existing assets must be re-uploaded first).
    NewThe Asset Bundle Assignment dialog now displays more relevant information, like the version name (existing assignments must be updated first).
    NewYou can now open a specific Asset Bundle version directly from the Asset Bundle Assignment dialog.
    NewWhen you select an assigned Asset Bundle version, all versions of that bundle are now shown.
    ChangeIn the Asset Editor, Asset Bundle versions are now sorted by when they were last changed, the newest version is on top and selected by default.
    ChangeAll Asset Folders are now collapsed by default.
    ChangeWhen editing a DataSource configuration, you can now press the Enter key to insert a new line without closing the dialog.
    FixIf you make a mistake when editing a DataSource configuration, you now get a more helpful message.
    FixAsset Bundle drafts are automatically created whenever you make any change to a published version – this didn't work in a few cases, but now does.

    Release 20 Jun 22

    Version 2.0.202206201

    TypeDescription
    New⭐ Assets (preview feature)
    • File and Image Assets can now be uploaded and used in configurators
    • Assets can be organized in Folders
    • Assets can be renamed, copied and deleted
    • Assets can be referenced in DataSources with the new LinkedAsset column

    Release 13 Jun 22

    Version 2.0.202206131

    TypeDescription
    RemoveCustom ID functionality no longer available

    Release 30 Mar 22

    Version 2.0.202203303

    TypeDescription
    New⭐ Assets (preview feature)
    Import files or resources on company-level to use them inside configurators
    • Manage asset bundles
    • Upload CSV-files as DataSource assets
    • Query DataSource assets with the new TableComponent
    New⭐ First page (Asset editor) based on the new front-end stack with React
    ChangeThe cursor of comboboxes is now a pointer instead of text when hovered

    Release 8 Feb 22

    Version 2.0.202202081

    TypeDescription
    NewConfigurator company theme for new Combeenation CI
    ChangeEnd user file upload limit increased from 50 to 100 MB

    Release 31 Jan 22

    Version 2.0.202201311

    TypeDescription
    FixIncorrect SigSlo validation errors shown for SigSlos connected to ShapeDiver 3d control
    FixRecord component editor breaks sometimes after auto formatting

    Release 22 Dez 21

    Version 2.0.202112221

    TypeDescription
    New.NET 6 release

    Release 16 Dez 21

    Version 2.0.202112161

    TypeDescription
    New⭐ Compare Mode: A draft or version can now be compared to any other version of the same company. It can be started from any editor with the button in the top-left corner.
    NewComponents can now be filtered by their type (see menu of the Components-List in the editor). The results can be further filtered with the default text-search.
    NewShow the draft name in the top-left of the editor
    FixCompany settings window is now scrollable to prevent cut off elements

    Release 14 Dez 21

    Version 2.0.202112141

    TypeDescription
    FixFixed Shapediver Embedded control having wrong initial parameter values in rare cases

    Release 29 Nov 21

    Version 2.0.202111291

    TypeDescription
    FixIndex parameter of list slots Add Item & Remove Item are working correctly again.
    ChangeAvailable component slots are now chosen based on the component's input type instead of its result type. E.g. a value component with input type text which results in a record can now be used as Set value slot which was not possible earlier.
    New⭐ Slot parameters can now directly access column data of value components resulting in a record, which only worked with record components earlier. E.g. SomeValueCmp.ValueChanged -> PriceLabel.setValue(SomeValueCmp.coldata.price).
    NewThe configurator slot updateCssVariables now accepts records from any source, previously it only worked with record components.
    New⭐ Better visualization for complex component results like records or lists

    Release 29 Sep 21

    Version 2.0.202109291

    TypeDescription
    Change⭐ Revamped User Permissions
    NewShow "Uploaded at" date & time in resource component
    FixFixed reconnect issues in rare cases (e.g. when creating a new CSS Module)

    Release 18 Aug 21

    Version 2.0.202108181

    TypeDescription
    NewCopy drafts across companies (additional drop-down list in the existing dialog)
    ChangeSearch fields can be cleared with the Esc key

    Release 8 Jul 21

    Version 2.0.202107081

    TypeDescription
    New2 responsive templates in the "create configurator" dialog
    New⭐ Possibility to create PDFs from "self written" HTML and upload them to a resource component. See CfgrUtils.convertHtmlToPdf in CustomJS utils for details on how to use this.

    Release 23 Jun 21

    Version 2.0.202106231

    TypeDescription
    Change⭐ Revamped configurator dashboard (formerly known as gallery), now contains views for all companies/configurators/drafts, company/configurator settings and a new cfgn metrics overview
    NewNew property price for all shops. The price of the finish (if set) will be taken into account for the Total Revenue calculation
    FixTextbox caption wasn't correctly positioned when set to "Top"
    FixUsers no longer need to logout/login in order to see company assignment changes (e.g. added or removed from a company)
    ChangeUngzipped Babylon files will be gzipped on upload

    Release 11 Mai 21

    Version 2.0.202105111

    TypeDescription
    FixFix issue which sometimes caused the configurator to change wizard pages "on its own" in an "infinite loop".
    This was mainly an issue when on a bad internet connection.
    It can still happen that the configurator changes wizard pages "on its own" but this should now stop quite quick and should not end in an "infinite loop" anymore.
    FixDesign editor: Some properties with dropdown-values showed only the id instead of the display name
    ChangeImproved visualization of preview/transient mode and read-only mode in the cfgr editor
    ChangeSeveral improvements and design changes as follow-up of the redesign:
    • Blue background for configurator editor "landing page" as well
    • Reskinned "browser not supported page"
    • Adjust upper alignment of component editors main panel and property lists
    • Hide "zoom control" for default view in the configurator editor background whenever a component editors main panel is visible

    Release 26 Apr 21

    Version 2.0.202104261

    TypeDescription
    ChangeAvoid showing Shapediver load timeout error if no viewer version is configured
    ChangeIn addition to the Redis cache, sessions are now stored in the CosmosDb. Possible Redis cache troubles should no longer disrupt users in the backend.

    Release 21 Apr 21

    Version 2.0.202104211

    TypeDescription
    NewCompany theme for "Palme" (green loading animation, ...)
    NewAutomatically remove leading & trailing whitespaces (blanks, new lines etc.) from resource name given to Upload user resource slot to prevent accidental and hard to solve "ResourceNotFound" errors
    FixPrevent exception when opening configurator in hidden Firefox tab

    Release 14 Apr 21

    Version 2.0.202104141

    TypeDescription
    ChangeImproved changing of combobox values in the Components- and Properties-List
    ChangeComponent-List entries use the whole row width when only the name is shown
    ChangeAllow text selection in the result panel of Records
    FixIssues when combobox values weren't correctly commited
    FixPrevent exception when leaving the Design Editor with a Shapediver Embedded control

    Release 12 Apr 21

    Version 2.0.202104121

    TypeDescription
    FixLoad mask did not disappear when preparing social sharing

    Release 4 Apr 21

    Version 2.0.202104071

    TypeDescription
    NewAdded new properties CSS Class, Over viewer only and Hide On for customizing load mask of Shapediver Embedded Control

    Release 16 Mar 21

    Version 2.0.202103161

    TypeDescription
    ChangeSocial Sharing: Added platforms and reworked default button design
    See Social share for detailed information.

    Release 11 Mar 21

    Version 2.0.202103113

    TypeDescription
    NewSupport for new file types in 3d asset resource component: _.stl, _.obj
    RemoveRemoved debug controls container for Shapediver Embedded Control

    Release 9 Mar 21

    Version 2.0.202103092

    TypeDescription
    NewAdded debug controls container for Shapediver Embedded Control

    Release 2 Mar 21

    Version 2.0.202103021

    TypeDescription
    FixTransition time was not applied when updating camera position in Shapediver viewer

    Release 26 Feb 21

    Version 2.0.202102262

    TypeDescription
    ChangeShapediver Embedded Control now uses Shapediver API Version V2
    FixWhen a record column was named 'ID' and contained identical values, it led to missing entries in the result-view

    Release 17 Feb 21

    Version 2.0.202102171

    TypeDescription
    NewRedesign of the whole backend

    Release 16 Dec 20

    Version 1.26.202012161

    TypeDescription
    NewNew signal Selected key changed for record components

    Release 9 Dec 20

    Version 1.26.202012091

    TypeDescription
    NewNew slot Set caption text for comboboxes
    NewSupport for new file types in 3d asset resource component:
    *.step, *.stp, *.hdr & *.babylon

    Release 13 Aug 20

    Version 1.25.202008131

    TypeDescription
    ChangeIncreased draft limit from 5 to 10
    ChangeIncreased upload limit from 10 to 50 MB

    Release 9 Jul 20

    Version 1.25.202007088

    TypeDescription
    ChangeMajor server improvements (Docker, .NET Core, ...)
    NewWhitelist settings for configurators
    RemoveSocial login buttons removed

    Release 26 Jun 20

    Version 1.25.19

    TypeDescription
    Change"Non admin" users are now also allowed to delete withdrawn configurators
    NewHighlighting for dev drafts in configurator gallery which have not been edited for a long time (@fa-pencil = dev draft exists, @fa-pencil = 2 months untouched, @fa-pencil = 6 months untouched)

    Release 7 Mai 20

    Version 1.25.17

    TypeDescription
    ChangeIcons to highlight published configurators and configurators with existing dev draft(s) in gallery

    Release 6 Feb 20

    Version 1.25.3

    TypeDescription
    FixWhen creating a new control via DnD of component, oftentimes an error was shown and SigSlos were not created properly

    Release 27 Jan 19

    Version 1.25.0

    TypeDescription
    Change⭐ New parameter Sanitize Value for various SigSlo slots.
    See User input sanitization for detailed information.
    New⭐ Improved support for CSS custom properties (CSS Variables)
    NewNew function CtrlUtils.onInteractiveVisualClicked in custom JS API
    FixIssue with slider control when settings its value to "0"

    Release 2 Aug 19

    Version 1.24.87

    TypeDescription
    NewSupport for *.js.gz files
    ChangeJavaScript files (*.js) will be gzipped and renamed (to *.js.gz ) upon upload
    ChangeGLB files (*.glb) will be gzipped unless they are already gzipped
    FixThe tab for the finishes result values will displayed again

    Release 03 Jul 19

    Version 1.24.80

    TypeDescription
    NewImprovements for Debug view in configurator preview:
    • New button Use local custom JS in control panel which adds uselocalcjs=true URI param
    • Monospaced font for Watches panel
    • Options to copy watch result to clipboard, word wrap & prettify it
    NewProperty Viewer version for ShapeDiver3dEmbedded ctrl which can be set via SigSlo. Should be used instead of property Viewer JS from now on.
    ChangeDrafts can now be copied from 1 configurator into another already existing one. Until now copying of drafts was only allowed to a new configurator or inside the currently selected configurator.
    FixProperties Zoom min & Zoom max of ShapeDiver3dEmbedded control were not working as expected
    ChangeMaximum size for archived images increased to 5000px in height 5000px in width

    Release 23 May 19

    Version 1.24.73

    TypeDescription
    ChangeShopware shop now supports price per unit

    Release 28 Apr 19

    Version 1.24.64

    TypeDescription
    NewNew slots Set background for labels & Set link URL for buttons
    NewNew API methods Cbn.utils.TextHelper.btoaUTF8 & Cbn.utils.TextHelper.atobUTF8 which shall be used in custom JS when converting text (e.g. SVG) to base64 and vice verca instead of erroneous window.atob & window.btoa.
    ChangeUpdated Combeenation logo which is shown at the bottom of configurators which have plans for which the ad is shown.

    Release 24 Apr 19

    Version 1.24.62

    TypeDescription
    NewAdd new resource component type 3D assets (Currently supported: gzipped GLB files)

    Release 2 Apr 19

    Version 1.24.52

    TypeDescription
    NewAdd new type Hash with the methods computeSha256 & computeHmacSha256
    NewAdd new text method IsBase64()

    Release 20 Mar 19

    Version 1.24.42

    TypeDescription
    NewQRCode.generate()

    Release 12 Mar 19

    Version 1.24.41

    TypeDescription
    FixFix zooming of graphic views with mouse wheel in Firefox & IE
    NewCombeenation API
    ChangeProduct version retention time (keep all versions which are not older than 2 months and always at least 50 versions)

    Release 8 Jan 19

    Version 1.24.0

    TypeDescription
    NewCustom CSS modules which allow splitting of custom CSS into separate modules
    NewSlot Set placeholder for textboxes & comboboxes
    ChangeMinor improvements to design editor:
    • Deselect all controls when pressing the alt key
    • Submit add control dialog by Ctrl+Enter
    • Multi line text values in property lists cannot be edited anymore with the lists single line inline editor since that lead to loss of all line breaks

    Release 2 Jan 19

    Version 1.23.5

    TypeDescription
    New"Notes" property for all controls

    Release 29 Nov 18

    Version 1.23.3

    TypeDescription
    ChangeVersion history UI updated and minor UI changes on draft list
    NewAdded button for showing an embedded example of the configurator

    Release 6 Oct 18

    Version 1.23.2

    TypeDescription
    NewSlot Redirect parent page for Configurator control
    FixSlot Set embed ticket for ShapeDiver3dEmbedded control wasn't working properly

    Release 25 Oct 18

    Version 1.23.1

    TypeDescription
    NewControl ShapeDiver3dEmbedded for new ShapeDiver viewer can now be created using the "add control" dialog
    New⭐ New Configurator control which holds some useful signals & slots to handle IFrame sizes, restart configurations and more
    Change⭐ Improved checkout workflow
    NewSystem texts like Adding configuration to cart..., Reconnecting... or Update available can now be customized per configurator
    FixSlot SetHorizOffset didn't work when layer was hidden

    Release 10 Oct 18

    Version 1.22.0

    TypeDescription
    FixAdd missing slot Set visibility to slider ctrl
    FixFixed several security issues
    ChangeNew password policy (password update is recommended)

    Release 1 Oct 18

    Version 1.21.7

    TypeDescription
    Change⭐ Updated list of officially supported browsers
    FixSelection of interactive visuals didn't work anymore in Edge

    Release 5 Sep 18

    Version 1.21.2

    TypeDescription
    NewHighlighting of names column for erroneous properties in value, graphic, resource & checkout editor
    FixDataviews sometimes didn't fire "Value changed" signal correctly
    NewProperty "CommPluginSettings" for embedded ShapeDiver3d control

    Release 28 Aug 18

    Version 1.21.0

    TypeDescription
    NewAll Hive errors now indicate in which rule they originally occurred.
    Previously, some errors did not, which made it difficult to figure out what caused them.
    ChangeThe ComponentList now only highlights components in which an error originates.
    Indirectly affected components will no longer be highlighted to make it simpler to find the root cause of a problem.
    ChangeOverhauled all Hive error messages to make them less verbose and more understandable. Type names will now be written into separate lines. Previously, long inline type names made some error messages unreadable.
    NewError messages about type mismatches now contain hints about the parts of a type that are not compatible.
    For example, if two tables do not match, the message will only mention the affected columns and omit all others.

    Release 7 Aug 18

    Version 1.20.45

    TypeDescription
    ChangeNew favicon for backend & configurator
    NewNew keyboard shortcut Ctrl+Alt+Up/Down for code editor to add new cursor in line above/below
    NewButton in configurator preview debugger to get current camera position & parameter info of ShapeDiver3d control
    NewProperty & slot to set camera position of ShapeDiver3d control
    NewText field in design editors Add control dialog to set initial name of newly created control
    FixPrevent copying of control to invalid position. E.g. wizardpages can only be pasted as childs of wizards etc.
    FixCorrectly apply background color for ShapeDiver3d ctrl

    Release 28 Jun 18

    Version 1.20.40

    TypeDescription
    FixThe Set content URL slot of the external content control didn't work when calling it multiple times

    Release 11 Apr 18

    Version 1.20.35

    TypeDescription
    FixComboBoxes sometimes didn't fire "Value changed" signal correctly
    NewAdd handling for session timeout of "old" SD viewer

    Release 6 Apr 18

    Version 1.20.34

    TypeDescription
    FixSetting checkbox caption via SigSlo sometimes didn't work
    NewNew slot "Set caption text" for textboxes

    Release 28 May 18

    Version 1.20.32

    TypeDescription
    ChangeRasterization will be done via ChromeBeeverter

    Release 20 Apr 18

    Version 1.20.30

    TypeDescription
    RemoveMail share option from share button. You can still share configurations via mail.

    Release 19 Apr 18

    Version 1.20.29

    TypeDescription
    FixWhitespace in SVG text will now be preserved

    Release 11 Apr 18

    Version 1.20.27

    TypeDescription
    FixSlot "Set header text" didn't work correctly under some circumstances
    NewNew properties "Zoom min" & "Zoom max" for ShapeDiver3d control

    Release 9 Apr 18

    Version 1.20.26

    TypeDescription
    FixCertain style issues with older Safari versions (mainly <= v9):
    • Centering of text in buttons
    • Background of RadioButtons with "Looks like button" property set
    FixPage panning on touch devices above GraphicView with zoom & pan disabled
    ChangeTextboxes "typing" signal has been removed and "value changed" acts a little different now since it is also triggered a short while after the user stopped typing

    Release 13 Mar 18

    Version 1.20.20

    TypeDescription
    NewREST checkout

    Release 22 Feb 18

    Version 1.20.15

    TypeDescription
    NewNew properties for the ShapeDiver3d control: Restrict camera, Restrict pan, Control damping, Zoom speed, Viewer version & Show controls
    NewNew slots for the ShapeDiver3d control: Set viewer version & Show/hide controls
    ChangeSlots to set the ShapeDiver3d control parameters are now shown in alphabetical order

    Release 20 Feb 18

    Version 1.20.13

    TypeDescription
    NewAdd message hash to Flex checkout

    Release 7 Feb 18

    Version 1.20.5

    TypeDescription
    NewNew draft properties CreatedBy, LastPreviewedBy, LastPreviewedAt

    Release 6 Feb 18

    Version 1.20.4

    TypeDescription
    NewSignal "Enter pressed" for textboxes
    NewFTP checkout

    Release 1 Feb 18

    Version 1.20.3

    TypeDescription
    RemoveRemoved the plan keyword (use configurator instead)
    RemoveRemoved GetEditLink and GetCopyLink functions from configuration (use EditUrl and CopyUrl instead)

    Release 24 Jan 18

    Version 1.20.2

    TypeDescription
    FixControls which were disabled by SigSlo were erroneously enabled when a parent panel was enabled by SigSlo
    FixControls filter of SigSlo connections list wasn't always working correctly
    FixEntered text sometimes disappeared when focus was removed from textbox with connected "typing" signal
    FixAdding components per drag & drop to the configurator in the design component sometimes didn't work
    ChangeAdjusted embedding info in presets view

    Release 21 Dec 17

    Version 1.20

    TypeDescription
    New⭐ Introducing the # Operator
    NewNew variables configurator and presets
    NewText functions contains and replace
    ChangeText comparison is now case sensitive
    NewCase insensitive Text comparison operator ~=
    NewDynamicVisual Items
    NewMulti-line comments
    ChangeImproved Hive Error Messages
    NewNew properties "Busy graphic URL" & "Busy graphic pos." for ShapeDiver3d control
    ChangeConfigurator component is now called Design

    Release 15 Dec 17

    Version 1.19.5

    TypeDescription
    NewNew property "Custom URI parameter" for ShapeDiver control (e.g. to set custom ShapeDiver viewer version)

    Release 7 Dec 17

    Version 1.19.2

    TypeDescription
    FixSome SVGs were not drawn anymore in latest Chrome version 63

    Release 6 Dec 17

    Version 1.19.1

    TypeDescription
    NewZoom & pan of graphic view on touch devices with pinch to zoom
    NewShapeDiver3d control parameters are now initialised with configuration values from SigSlos

    Release 12 Oct 17

    Version 1.18.0

    TypeDescription
    NewVisuals from nested GraphicComponents can now be used as interactive visuals in a graphic view
    ChangeGroups in component list with many components are now collapsed by default
    FixSome minor issues in quick launcher

    Release 5 Oct 17

    Version 1.17.2

    TypeDescription
    FixShow preview images for SVG images uploaded in storage tab

    Release 28 Sep 17

    Version 1.17.1

    TypeDescription
    FixShow details for "non image" resources in storage tab

    Release 19 Sep 17

    Version 1.17.0

    TypeDescription
    NewMagento 2 shops are now supported
    NewCreate drafts based on other drafts and on older versions (tooltip shows the based on version)
    NewNew "Selected" & "Deselected" signal for checkboxes
    ChangeUpdated publish dialog, warning will be displayed if recently published changes will be overwritten
    ChangeShow info message if a deleted draft is opened in preview
    ChangeDrafts are now sorted by their name
    ChangeWarning will be shown if a draft gets deleted
    FixSVG rasterization fixed, backgrounds are now transparent again

    Release 17 Aug 17

    Version 1.16.0

    TypeDescription
    New⭐ Introducing Drafts
    ChangeRestore your deleted configurators up to seven days

    Release 10 Aug 17

    Version 1.15.0

    TypeDescription
    New"Select text" parameter for "Set Focus" slot of textboxes
    NewDynamic signals for output parameters of ShapeDiver3d control
    NewProperties for horizontal & vertical alignment of text inside buttons, panel headers, checkboxes & RadioButtons
    NewProperty "Looks like button" for checkboxes & RadioButtons
    FixClicking on a graphic view removes focus from currently active element

    Release 1 Aug 17

    Version 1.14.33

    TypeDescription
    NewDocumentation of controls DOM & CSS classes
    NewSigSlos are automatically updated when renaming a control
    NewControls can be copied in configurator editor
    NewMore auto completions for custom CSS (built in classes, custom classes from controls etc.)
    Was this article helpful?
    What's Next
    General
    Knowledge
    Support
    Follow Us